Vni Messages; Vni-2 - Cisco AP775A - Nexus Converged Network Switch 5010 Reference

VNI Messages

S e n d d o c u m e n t c o m m e n t s t o n e x u s 7 k - f e e d b a c k - d o c @ c i s c o . c o m
Error Message
VNI-3
Error Message
Error Message
VNI-6
Error Message
Error Message
Error Message
Cisco NX-OS System Messages Reference
2-790
VNI-2-VNI_ALLOC_MEMORY: Memory allocation failed
The service failed to allocate a block of dynamic memory.
Explanation
No action is required.
Recommended Action
VNI-3-INIT_FAILED: Initialization failed. Component [chars]
The system has detected that the service has failed to start. The failure occurred while
Explanation
initializing the component [chars].
Enter the show processes command to check the status of the other processes,
Recommended Action
debug the specified component.
VNI-3-VNI_INIT_FAILED: Initialization failed. Component [chars]
The system has detected that the service has failed to start. The failure occurred while
Explanation
initializing the component [chars].
Enter the show processes command to check the status of the other processes,
Recommended Action
debug the specified component.
VNI-6-INTERFACE_EVENT: VSAN interface [chars] [chars]
The specified VSAN The system has detected that the interface has been successfully
Explanation
[chars].
Recommended Action No action is required.
VNI-6-STARTING: Virtual Network Interface Manager started
The service has successfully started.
Explanation
No action is required.
Recommended Action
VNI-6-VNI_INTERFACE_EVENT: VSAN interface [chars] [chars]
Explanation The specified VSAN The system has detected that the interface has been successfully
[chars].
Recommended Action No action is required.
Chapter 2 System Messages and Recovery Procedures
OL-15994-03