Cisco AP775A - Nexus Converged Network Switch 5010 Reference page 289

Chapter 2 System Messages and Recovery Procedures
S e n d d o c u m e n t c o m m e n t s t o n e x u s 7 k - f e e d b a c k - d o c @ c i s c o . c o m
Error Message
Explanation
Parameters: Operation type, Vlan-id, Group, Source ...
Recommended Action
Support web site http://www.cisco.com/tac.
Error Message
%d failed
Explanation
Parameters: Operation type, Interface, Group, Source, Vlan-id ...
Recommended Action
Support web site http://www.cisco.com/tac.
Error Message
failed
Explanation
Parameters: Operation type, Interface, Vlan-id ...
Recommended Action
Support web site http://www.cisco.com/tac.
Error Message
Explanation
Parameters: Operation type, Vlan-id ...
Recommended Action
Support web site http://www.cisco.com/tac.
Error Message
Explanation
Parameters: Failure reason ...
Recommended Action
Error Message
Explanation
Parameters: API name, Function name ...
Recommended Action
OL-15994-03
IGMP-3-HA_GROUP Format: HA %s operation in vlan %d failed for (%s, %s)
IGMP-SNOOP called a PSS API which returned an error.
Contact the Cisco Technical Assistance Center (TAC) through the Cisco
IGMP-3-HA_OIF Format: HA %s operation on OIF %s for (%s, %s) in vlan
IGMP-SNOOP called a PSS API which returned an error.
Contact the Cisco Technical Assistance Center (TAC) through the Cisco
IGMP-3-HA_RPORT Format: HA %s operation on router-port %s for vlan %d
IGMP-SNOOP called a PSS API which returned an error.
Contact the Cisco Technical Assistance Center (TAC) through the Cisco
IGMP-3-HA_VLAN Format: HA %s operation for vlan %d failed
IGMP-SNOOP called a PSS API which returned an error.
Contact the Cisco Technical Assistance Center (TAC) through the Cisco
IGMP-3-IGMP_INIT Format: IGMP init failed: %s
IGMP process initialization has failed.
Dump core, and and and then restart component.
IGMP-3-IM_API_FAILED Format: %s failed in %s
IM API failed in MCEC IGMP Snoop.
No action is required.
Cisco NX-OS System Messages Reference
IGMP Messages
2-251