Cisco AP775A - Nexus Converged Network Switch 5010 Reference page 879

Chapter 2 System Messages and Recovery Procedures
S e n d d o c u m e n t c o m m e n t s t o n e x u s 7 k - f e e d b a c k - d o c @ c i s c o . c o m
Error Message
different from rib and domain manager in vsan [dec]
Error Message
exceeded
Error Message
zonesets exceeded
ZONE-3
Error Message
Error Message
due to qos not enabled
OL-15994-03
ZONE-2-ZS_VIRTUAL_DOMAIN_INCONSISTENT: IVR reporting virtual domain
Explanation IVR reporting virtual domain different from RIB and domain manager in VSAN [dec].
No action is required.
Recommended Action
ZONE-2-ZS_ZONE_LIMIT_EXCEEDED: The limit for maximum number of zones
The number of zones configured has exceeded the maximum number of zones allowed
Explanation
across all VSANs Due to this, distRIBution or merge operation may fail.
Make sure the number of zones is less than the maximum allowed across all
Recommended Action
VSANs.
ZONE-2-ZS_ZONE_SET_LIMIT_EXCEEDED: The limit for maximum number of
The number of zone sets configured has exceeded the maximum number of zone sets
Explanation
allowed across all VSANs Due to this, distRIBution or merge operation may fail.
Make sure the number of zone sets is less than the maximum allowed across
Recommended Action
all VSANs.
ZONE-3-LZ_UNKNOWN_MSG: Recvd. from Node=[dec] SAP=[dec]
The LUN/Read-only zoning process has received an unknown message from
Explanation
[dec]].[dec]. This information is for debugging only.
No action is required.
Recommended Action
ZONE-3-ZS_ACTIVATION_FAILED_DUE_TO_QOS_DISABLED: Activation failed
Activation of zone set failed due to qos not enabled.
Explanation
Recommended Action Make sure qos is enabled and reactivate the zone set in VSAN.
Cisco NX-OS System Messages Reference
ZONE Messages
2-841