Isis-4 - Cisco AP775A - Nexus Converged Network Switch 5010 Reference

Chapter 2 System Messages and Recovery Procedures
S e n d d o c u m e n t c o m m e n t s t o n e x u s 7 k - f e e d b a c k - d o c @ c i s c o . c o m
Error Message
external metric from %s
Explanation
combination, by a router within the network
Parameters: Level, Address Prefix, Mask, LSP Id ...
Recommended Action
information. Either reconfigure the remote system or update the system software to a version that
does not originate incorrect information.
Error Message
detected over %s from %s
Explanation
ID
Parameters: Level,The system ID, Interface Name, MAC ID ...
Recommended Action
the command net.
Error Message
%s detected
Explanation
system ID.
Parameters: Level,The system ID ...
Recommended Action
the command net.
Error Message
Explanation
Parameters: Level, LSP Type ...
Recommended Action
LSP, for example by reducing redistRIButed prefixes.
Error Message
remove lower priority TLVs to make room for type %d TLV
Explanation
router\sLSP,andanattempttodroplowerpriorityinformationhasfailed.'
Parameters: Level, LSP Type, TLV Type ...
Recommended Action
LSP, for example by reducing redistRIButed prefixes.
OL-15994-03
ISIS-4-ILLEGAL_PREFIX Format: Ignore internal L%d route %s/%d with
IS-IS has detected an internal route advertised with external metric, which is an illegal
You must correct the remote system that is generating the incorrect
ISIS-4-LAN_DUP_SYSID Format: L%d LAN IIH - Duplicate system ID %s
IS-IS has detected another system on the indicated LAN that is reusing the local system
Configure either the local or remote router with a different system ID using
ISIS-4-LSP_DUP_SYSID Format: L%d LSP - Possible duplicate system ID
IS-IS has detected another non-directly connected system that is reusing the local
Configure either the local or remote router with a different system ID using
ISIS-4-LSPFULL Format: L%d %s LSP space is full
There is no storage space left for routing information in the router's LSP
Configure IS-IS so that less information will be distRIButed in the router's
ISIS-4-LSPFULL_FAILED_DROP Format: L%d %s LSP is full and couldn't
There is no storage space left for routing information in the
Configure IS-IS so that less information will be distRIButed in the router's
Cisco NX-OS System Messages Reference
ISIS Messages
2-323