Lc_Port_Channel-Slot# Messages; Lc_Port_Channel-Slot#-0; Lc_Port_Channel-Slot#-3 - Cisco AP775A - Nexus Converged Network Switch 5010 Reference

LC_PORT_CHANNEL-SLOT# Messages

S e n d d o c u m e n t c o m m e n t s t o n e x u s 7 k - f e e d b a c k - d o c @ c i s c o . c o m
Error Message
Error Message
[dec], MBit [dec], SBit [dec], I30 [dec]
LC_PORT_CHANNEL-SLOT# Messages
This section contains the LC_PORT_CHANNEL-SLOT# messages.

LC_PORT_CHANNEL-SLOT#-0

Error Message
[chars]: [chars]
Error Message
new [dec], total [dec])

LC_PORT_CHANNEL-SLOT#-3

Error Message
Cisco NX-OS System Messages Reference
2-364
LC_CFG-SLOT#-2-LC_CFG_EXITED: exited with code [dec]
Process lc_cfg_mgr exited.
Explanation
No action is required.
Recommended Action
LC_CFG-SLOT#-2-LC2_CPU_ERRORS: [chars], Total IC [dec], DC [dec], Tag
LC CPU Cache errors.
Explanation
No action is required.
Recommended Action
LC_PORT_CHANNEL-SLOT#-0-HW_FAILURE: fatal error in configureing
Fatal hardware error in port channel configuration.
Explanation
Reset the module.
Recommended Action
LC_PORT_CHANNEL-SLOT#-0-IDX_FULL: D_IDX table full (current [dec],
Programming error in port channel configuration.
Explanation
Recommended Action Reset the module.
LC_PORT_CHANNEL-SLOT#-3-LC_PORT_CHANNEL_ERROR: [chars]
General error.
Explanation
No action is required.
Recommended Action
Chapter 2 System Messages and Recovery Procedures
OL-15994-03