Sme_Cpp-Slot# Messages; Sme_Cpp-Slot#-2 - Cisco AP775A - Nexus Converged Network Switch 5010 Reference

SME_CPP-SLOT# Messages

S e n d d o c u m e n t c o m m e n t s t o n e x u s 7 k - f e e d b a c k - d o c @ c i s c o . c o m
Error Message
(type [chars]) initiated [chars] in SME cluster (name [chars], id %llx)
Error Message
([chars]) rekeyed successfully in SME cluster (name [chars], id %llx)
Error Message
Error Message
SME_CPP-SLOT# Messages
This section contains the SME_CPP-SLOT# messages.

SME_CPP-SLOT#-2

Error Message
Devices under same physical LUN - Old Cluster Name:[chars] New Cluster
Name:[chars] Old Group Name:[chars] New Group Name:[chars] Old Device Name:[chars]
New Device Name:[chars]
Error Message
under same Tape Device - Device Name:[chars] Host PWWN:[chars] Tgt PWWN:[chars]
LUN Id:[chars] Serial Num:[chars] Serial Num:[chars]
Cisco NX-OS System Messages Reference
2-608
SME_CPP-5-LOG_SME_REPLACE_SMARTCARD_START: Replace smartcard process
Explanation SME KMC connection up.
No action is required.
Recommended Action
SME_CPP-5-LOG_SME_TAPE_VOLUME_GROUP_REKEYED: Tape volume group
SME Master Key rekeyed.
Explanation
No action is required.
Recommended Action
SME_CPP-5-SME_DISABLED: SME Disabled
SME service has been disabled.
Explanation
No action is required.
Recommended Action
SME_CPP-5-SME_ENABLED: SME Enabled
SME Service nabled.
Explanation
No action is required.
Recommended Action
SME_CPP-SLOT#-2-LOG_ERR_SME_DEVICE_MISCONFIG: Different configured
Different configured devices under same physical LUN.
Explanation
No action is required.
Recommended Action
SME_CPP-SLOT#-2-LOG_ERR_SME_ITL_MISCONFIG: Different physical LUNs
Different physical LUNs under same Tape Device.
Explanation
Recommended Action No action is required.
Chapter 2 System Messages and Recovery Procedures
OL-15994-03