Cisco AP775A - Nexus Converged Network Switch 5010 Reference page 790

U6RIB Messages
S e n d d o c u m e n t c o m m e n t s t o n e x u s 7 k - f e e d b a c k - d o c @ c i s c o . c o m
Error Message
%s/%d: %s
Explanation
Parameters: Client, Prefix, Prefix-Length, Error ...
Recommended Action
Error Message
Explanation
depending on the previous error logged.
Parameters: Client, Message ...
Recommended Action
Error Message
Explanation
taken depending on the previous error logged.
Recommended Action
Error Message
Explanation
Parameters: MTS queue name, Error ...
Recommended Action
all VDCs on the system.
Error Message
Explanation
unrecoverable error.
Recommended Action
Error Message
Explanation
Recommended Action
Cisco NX-OS System Messages Reference
2-752
U6RIB-3-MOD_ERROR Format: Client \%s\ requested modify route for
The named client sent a modify route request, which generated the shown error.
No action is required.
U6RIB-3-MORE_INFO_ERROR Format: Client \%s\: %s
This error provides further information about the previous error. Action should be taken
No action is required.
U6RIB-3-MORE_MTS_INFO_ERROR Format: source SAP is: %d dest SAP is: %d
This error provides further information about the previous MTS error. Action should be
No action is required.
U6RIB-3-MTS_BIND Format: mts_bind failed for %s: %s
U6RIB was unable to bind to an MTS queue SAP.
Use 'reload' command to reload the system. Be aware that this problem affects
U6RIB-3-MTS_DEREGISTER Format: mts_deregister failed for u6rib: %s
U6RIB was unable to deregister client from U6RIB notifications, causing an
Use the 'restart' command to restart the feature and clear this problem.
U6RIB-3-MTS_DROP Format: Error returned from mts_drop(), errno: %s
An MTS API returned an error when U6RIB tried to drop a message.
No action is required.
Chapter 2 System Messages and Recovery Procedures
OL-15994-03