Cisco AP775A - Nexus Converged Network Switch 5010 Reference page 882

ZONE Messages
S e n d d o c u m e n t c o m m e n t s t o n e x u s 7 k - f e e d b a c k - d o c @ c i s c o . c o m
Error Message
zoneset present on VSAN [dec] in interoperability mode
Explanation
mode is turned on the VSAN [dec].
Recommended Action
interoperable members (PWWN).
Error Message
present in zone [chars] in vsan [dec]. QoS will not be applicable for LUN members.
Explanation
Recommended Action
Error Message
are zoned together or zoned with same device. virtual name: [chars] pwwn: [chars]
Explanation
[chars] pwwn: [chars].
Recommended Action
Error Message
are zoned together/with same device virtual name: [chars] pwwn: [chars]
Explanation
pwwn: [chars].
Recommended Action
Error Message
current interoperability mode
Explanation
the next zone set activation, distRIBution or merge operation may fail.
Recommended Action
of aliases is less than the maximum allowed in the current interoperability mode.
Error Message
member present in active or full zoneset in current interoperability mode
Explanation
mode set on the VSAN.
Recommended Action
full zone set has only supported members in the current interoperability mode.
Cisco NX-OS System Messages Reference
2-844
ZONE-4-ZS_NON_INTEROPERABLE_ZONE_SET: Non interoperable active
Active zone set has noninteroperable members (FCID, FWWN, .) when interoperability
Turn off interoperability mode OR make sure that active zone set has only
ZONE-4-ZS_QOS_LUN_WARNING: LUN member(s) and QoS attribute are
QoS will not be applicable to LUN zone members in zone [chars] in VSAN [dec].
No action is required.
ZONE-4-ZS_SDV_VIRT_REAL_CONFLICT_WARNING: Virtual and Real devices
Virtual and Real devices are zoned together or zoned with same device, virtual name:
No action is required.
ZONE-4-ZS_SDV_VIRT_REAL_CONFLICT_WARNING: Virtual and Real devices
Virtual and Real devices are zoned together/with same device, virtual name: [chars]
No action is required.
ZONE-4-ZS_TOO_MANY_ALIAS_IN_CURRENT_INTEROP_MODE: Too many aliases in
Too many aliases configured in current interoperability mode on the VSAN. Due to this,
Set the interoperability mode to appropriate value OR make sure the number
ZONE-4-ZS_UNSUPPORTED_MEMBER_IN_CURRENT_INTEROP_MODE: Unsupported
Active or full zone set has members that are not supported in the current interoperability
Set the interoperability mode to appropriate value OR make sure that active or
Chapter 2 System Messages and Recovery Procedures
OL-15994-03