Sysmgr-6 - Cisco AP775A - Nexus Converged Network Switch 5010 Reference

Chapter 2 System Messages and Recovery Procedures
S e n d d o c u m e n t c o m m e n t s t o n e x u s 7 k - f e e d b a c k - d o c @ c i s c o . c o m
Error Message
service [chars].
Explanation
Recommended Action
Error Message
Explanation
Recommended Action
Support web site http://www.cisco.com/tac.
Error Message
Explanation
Recommended Action
Error Message
PID([dec]).
Explanation
only.
Recommended Action
Error Message
successfully exited with exit code [chars] ([dec]).
Explanation
Recommended Action
Error Message
by sap [dec] has been enqueued for start.
Explanation
Recommended Action
Error Message
Explanation
Recommended Action
OL-15994-03
SYSMGR-6-HANDSHAKE_VERIFYING_DONE: Handshake verification done from
The system has detected an error.
No action is required.
SYSMGR-6-LC_UPG_DEBUG: LC DEBUG: [chars]
Linecard upgrade debug message.
Contact the Cisco Technical Assistance Center (TAC) through the Cisco
SYSMGR-6-RLIMIT_INFO: rlimit of service [chars]([dec]) = %llu
The system has detected an error.
No action is required.
SYSMGR-6-SERVICE_STARTED: Service [chars] in vdc [dec] started with
The The system Manager is starting a service. This message is for debugging purposes
No action is required.
SYSMGR-6-SERVICE_SUCCESS_EXIT: Service [chars] (PID [dec]) has
A service has successfully exited its execution.
No action is required.
SYSMGR-6-SRV_ENQUEUED_FOR_START: Conditional service [chars] started
The system has detected an error.
No action is required.
SYSMGR-6-SRVSCOPE_COMPLETED: Completed execution for scope [chars].
This message is for Cisco TAC debugging. This is not a problem or malfunction.
No action is required.
Cisco NX-OS System Messages Reference
SYSMGR Messages
2-713