Cisco AP775A - Nexus Converged Network Switch 5010 Reference page 177

Chapter 2 System Messages and Recovery Procedures
S e n d d o c u m e n t c o m m e n t s t o n e x u s 7 k - f e e d b a c k - d o c @ c i s c o . c o m
Error Message
Explanation
Parameters: Init function ...
Recommended Action
Error Message
Explanation
Recommended Action
Error Message
%d
Explanation
Parameters: Managed timer id ...
Recommended Action
configuration to the Cisco Technical Assistance Center (TAC) through the Cisco Support web site
http://www.cisco.com/tac.
Error Message
%s
Explanation
Parameters: MTS queue name, Error string ...
Recommended Action
Error Message
MTS_OPC_FM_SRV_FEATURE_STATUS
Explanation
Recommended Action
Error Message
Explanation
Parameters: Queue name, MTS SAP, Error ...
Recommended Action
OL-15994-03
EIGRP-2-INIT Format: %s failed
EIGRP process initialization has failed.
Restart the component when the system is working.
EIGRP-2-IP_REG_FAILED Format: ip_register() failed in eigrp_init_ip()
EIGRP could not register with the IP process.
Restart the component when the system is working.
EIGRP-2-MGD_TIMER_CREATE_FAIL Format: Failed to create managed timer
Failed to create specified managed timer.
EIGRP process still operational. Send the error log message and the running
EIGRP-2-MTS_BIND Format: mts_bind() failed in binding %s mts_q, error
Failed in binding to specified mts queue with error.
Restart the component when the system is working.
EIGRP-2-MTS_REQ_FM_STATUS Format: Failed in mts_register of
Failed to request feature status notification.
Restart the component when the system is working.
EIGRP-2-MTSBIND Format: Unable to bind to MTS SAP for %s, sap %d: %s
EIGRP was not able to create a message queue for communication.
Use the 'restart' command to restart the feature and clear this problem.
Cisco NX-OS System Messages Reference
EIGRP Messages
2-139