Cisco AP775A - Nexus Converged Network Switch 5010 Reference page 513

Chapter 2 System Messages and Recovery Procedures
S e n d d o c u m e n t c o m m e n t s t o n e x u s 7 k - f e e d b a c k - d o c @ c i s c o . c o m
Error Message
due to fan removal
Explanation
Recommended Action
Error Message
seconds due to less than 4 fans operating.
Explanation
Recommended Action
Error Message
module drivers
Explanation
Recommended Action
Error Message
[chars]) encountered clock failure
Explanation
Recommended Action
Error Message
number [chars]) Incompatible with backplane chassis Part Num:[chars]
Explanation
Recommended Action
Error Message
(Serial number [chars])
Explanation
Recommended Action
OL-15994-03
PLATFORM-0-SYS_SHUTDOWN_FAN_REMOVAL: System shutdown in [dec] seconds
The system shutdown in [decimal digit] seconds due to removal of fan module.
Enter a 'show env fan' to collect more information.
PLATFORM-0-SYS_SHUTDOWN_MDS9124_FAN_FAIL: System shutdown in [dec]
The system shutdown in [decimal digit] seconds due to less than 4 fans operating.
Enter a 'show env fan' to collect more information.
PLATFORM-0-SYS_SUP_DRIVER_LOAD_FAILED: Failed to load supervisor
Failed to load drivers.
Image is possibly corrupt. Try to load a different image.
PLATFORM-0-XBAR_CARD_CLK_FAIL: Xbar card in slot:[dec] (Serial number
The xbar in slot [decimal digit] encountered clock failure.
No action is required.
PLATFORM-0-XBAR_CARD_INCOMPAT_CHASSIS: Xbar card in slot:[dec] (Part
The xbar in slot [decimal digit] is incompatible with backplane chassis.
No action is required.
PLATFORM-0-XBAR_WRONGSLOTNUM: Xbar powered up in WRONG SLOT:[dec]
The xbar in slot [decimal digit] powered up in wrong slot.
No action is required.
PLATFORM Messages
Cisco NX-OS System Messages Reference
2-475