Cisco AP775A - Nexus Converged Network Switch 5010 Reference page 744

SYSMGR Messages
S e n d d o c u m e n t c o m m e n t s t o n e x u s 7 k - f e e d b a c k - d o c @ c i s c o . c o m
Error Message
(error-id [hex]).
SYSMGR-4
Error Message
configuration write forced.
Error Message
Error Message
by uid ([dec]).
Error Message
[chars] ([dec]).
Cisco NX-OS System Messages Reference
2-706
SYSMGR-3-URIFS_APPLY_FAILED: Applying URI filesystem database failed
Explanation The application of URI file system database has failed. [dec] is the error-ID
representing the failure reason.
No action is required.
Recommended Action
SYSMGR-4-CFGWRITE_PARTIALFORCED: Some services are missing; partial
The system is not fully operational, but a configuration copy has been forced. The
Explanation
services that are not running will not save their configuration, and the next time they will restart with
a default configuration.
Use the 'show process' command to find out which required services are not
Recommended Action
running.
SYSMGR-4-ON_DEMAND_STOP: On-demand service [chars] stopped.
The service start type is specified as type on-demand in its configuration file and an
Explanation
external request requested to abort it.
No action is required.
Recommended Action
SYSMGR-4-ON_DEMAND_STOP_UID_KNOWN: On-demand service [chars] stopped
The service start type is specified as type on-demand in its configuration file and an
Explanation
external request requested to abort it.
No action is required.
Recommended Action
SYSMGR-4-PARSEWARN_INVALID_CFGFILE: [chars]: unable to find [chars]:
This message is for Cisco TAC debugging. This is not a problem or malfunction.
Explanation
Recommended Action Contact the Cisco Technical Assistance Center (TAC) through the Cisco
Support web site http://www.cisco.com/tac.
Chapter 2 System Messages and Recovery Procedures
OL-15994-03