Port-Channel-2; Port-Channel-3 - Cisco AP775A - Nexus Converged Network Switch 5010 Reference

Chapter 2 System Messages and Recovery Procedures
S e n d d o c u m e n t c o m m e n t s t o n e x u s 7 k - f e e d b a c k - d o c @ c i s c o . c o m
Error Message
Error Message
[chars] [[chars]]
Error Message
[chars]

PORT-CHANNEL-2

Error Message
[chars] [chars]
Error Message
returning error

PORT-CHANNEL-3

Error Message
OL-15994-03
PORT-CHANNEL-1-MALLOC_FAILED: cannot allocate memory (size [dec])
Not enough memory.
Explanation
No action is required.
Recommended Action
PORT-CHANNEL-1-MAP_PARAM_FAILURE: mapping parameter failed for
Parameter mapping failed.
Explanation
Specified service has failed; check its status.
Recommended Action
PORT-CHANNEL-1-MCAST_SEND_FAILURE: failed to send multicast [chars]:
The system has failed to send a multicast message to all modules, usually because some
Explanation
module went down.
Run show port channel consistency to check consistency.
Recommended Action
PORT-CHANNEL-2-AUTO_CREATE_DISABLED: [chars] has been deprecated;
Auto create port channel is deprecated and disabled.
Explanation
Convert the auto created channel to persistent by doing port channel <n>
Recommended Action
persistent.
PORT-CHANNEL-2-RESET_MODULE: reset module [dec] for not responding or
A module is reset for not responding or returning error.
Explanation
No action is required.
Recommended Action
PORT-CHANNEL-3-COMPAT_CHECK_FAILURE: [chars] is not compatible
Explanation Compatibility check failed when adding ports to port channel.
Make sure the compatibility parameters are consistent while adding ports to
Recommended Action
port channel, or use force option.
PORT-CHANNEL Messages
Cisco NX-OS System Messages Reference
2-521