Sme_Cpp-Slot#-4; Smm Messages - Cisco AP775A - Nexus Converged Network Switch 5010 Reference

SMM Messages

S e n d d o c u m e n t c o m m e n t s t o n e x u s 7 k - f e e d b a c k - d o c @ c i s c o . c o m
Error Message
misconfigured under tape config - Device Name:[chars] Host PWWN:[chars] Tgt
PWWN:[chars] LUN Id:%Ld

SME_CPP-SLOT#-4

Error Message
[dec] of tape drive is 256K or less - [chars] LunID:[chars] VendorID:[chars]
ProdID:[chars] Serial Num:[chars] Cluster:[chars] Tape Device:[chars]
SMM Messages
This section contains the SMM messages.
SMM-3
Error Message
Error Message
Error Message
%s failed in %s with error %s
Cisco NX-OS System Messages Reference
2-610
SME_CPP-SLOT#-3-LOG_ERR_SME_NON_TAPE_MISCONFIG: A non-tape device
A disk misconfigured under tape config.
Explanation
No action is required.
Recommended Action
SME_CPP-SLOT#-4-LOG_WARN_SME_MAX_BLOCK_LEN: Maximum block length
This tape drive may not operate correctly with SME.
Explanation
No action is required.
Recommended Action
SMM-3-API_FAILED Format: %s failed in %s
A component API call has failed in SMM.
Explanation
No action is required.
Recommended Action
SMM-3-API_MTS_FAILED Format: %s failed in %s, errno: %s
SMM failed using the MTS API.
Explanation
No action is required.
Recommended Action
SMM-3-API_SM_FAILED Format: Could not allocate shared-memory segment.
SMM process could not allocate shared-memory.
Explanation
Parameters: SM API, Function name, Error ...
Recommended Action No action is required.
Chapter 2 System Messages and Recovery Procedures
OL-15994-03