Zone Messages; Zone-2 - Cisco AP775A - Nexus Converged Network Switch 5010 Reference

ZONE Messages

S e n d d o c u m e n t c o m m e n t s t o n e x u s 7 k - f e e d b a c k - d o c @ c i s c o . c o m
Error Message
Explanation
Recommended Action
Support web site http://www.cisco.com/tac.
Error Message
aliases exceeded
Explanation
allowed per VSAN Due to this, distRIBution or merge operation may fail.
Recommended Action
Error Message
attribute groups exceeded
Explanation
attribute groups allowed in a VSAN Due to this, distribution or merge operation may fail.
Recommended Action
in a VSAN.
Error Message
Explanation
Recommended Action
Error Message
VSAN [dec]
Explanation
Recommended Action
Error Message
Explanation
Recommended Action
Error Message
[chars]
Explanation
Recommended Action
Cisco NX-OS System Messages Reference
2-834
ZONE-2-LZ_MALLOC_ERROR: Size [dec] bytes
The LUN/Read-only zoning process could not allocate enough memory.
Contact the Cisco Technical Assistance Center (TAC) through the Cisco
ZONE-2-ZS_ALIAS_LIMIT_EXCEEDED: The limit for maximum number of
The number of aliases configured has exceeded the maximum number of aliases
Make sure the number of aliases is less than the maximum allowed in a VSAN.
ZONE-2-ZS_ATTR_GROUP_LIMIT_EXCEEDED: The limit for maximum number of
The number of attribute groups configured has exceeded the maximum number of
Make sure the number of attribute groups is less than the maximum allowed
ZONE-2-ZS_CHANGE_ACA_FAILED: ACA failed : [chars]
Zone Server cannot acquire change authorization : [chars].
Verify the interoperability mode on all the switches OR retry later.
ZONE-2-ZS_CHANGE_ACQUIRE_AUTH_FAILED: Acquire authorization failed on
Zone Server cannot acquire authorization on VSAN [dec].
No action is required.
ZONE-2-ZS_CHANGE_ACTIVATION_FAILED: Activation failed
Zone Server cannot activate the zone set.
No action is required.
ZONE-2-ZS_CHANGE_ACTIVATION_FAILED_RESN: Activation failed : reason
Zone Server cannot activate due to reason [chars].
No action is required.
Chapter 2 System Messages and Recovery Procedures
OL-15994-03