Cisco AP775A - Nexus Converged Network Switch 5010 Reference page 471

Chapter 2 System Messages and Recovery Procedures
S e n d d o c u m e n t c o m m e n t s t o n e x u s 7 k - f e e d b a c k - d o c @ c i s c o . c o m
Error Message
%d]
Explanation
Parameters: Interface Limit ...
Recommended Action
Error Message
reached
Explanation
Recommended Action
domain.
Error Message
Explanation
Parameters: action ...
Recommended Action
Error Message
Explanation
Parameters: Error ...
Recommended Action
Error Message
Explanation
Parameters: Error ...
Recommended Action
Error Message
errno: %s
Explanation
Parameters: Error ...
Recommended Action
OL-15994-03
OSPF-3-MAXIFS Format: Exceeded the limit on interfaces per area [i.e
Restricting the number of interfaces per area to avoid problems during lsa generation.
Reduce the number of interfaces per area.
OSPF-3-MAXLSAS Format: Maximum number of LSAs in domain has been
The OSPF domain contains more LSAs than this router can store.
Redesign the network to redistRIBute less external routes into the OSPF
OSPF-3-MIB_FAIL Format: Failed to %s the MIB
Error while loading or unloading the MIB.
No action is required.
OSPF-3-MTS_BIND Format: Error returned from mts_bind(), errno: %s
OSPF called an MTS API which returned an error.
No action is required.
OSPF-3-MTS_DROP Format: Error returned from mts_drop(), errno: %s
OSPF called an MTS API which returned an error.
No action is required.
OSPF-3-MTS_NOTIFY Format: Error returned from mts_send_notify(),
OSPF called an MTS API which returned an error.
No action is required.
Cisco NX-OS System Messages Reference
OSPF Messages
2-433