Lc_Port_Mgr-Slot# Messages; Lc_Port_Mgr-Slot#-2; Lc_Rdl Messages; Lc_Rdl-3 - Cisco AP775A - Nexus Converged Network Switch 5010 Reference

Chapter 2 System Messages and Recovery Procedures
S e n d d o c u m e n t c o m m e n t s t o n e x u s 7 k - f e e d b a c k - d o c @ c i s c o . c o m
Error Message
lookup port index for interface [chars]

LC_PORT_MGR-SLOT# Messages

This section contains the LC_PORT_MGR-SLOT# messages.

LC_PORT_MGR-SLOT#-2

Error Message
([chars]) with the following conditions: opc=[dec] ssap=[hex] dsap=[hex]
syserr=[hex]

LC_RDL Messages

This section contains the LC_RDL messages.

LC_RDL-3

Error Message
Error Message
Error Message
OL-15994-03
LC_PORT_CHANNEL-SLOT#-3-LC_PORT_CHANNEL_IDXMAP_FAILURE: could not
Explanation Could not look up port index.
No action is required.
Recommended Action
LC_PORT_MGR-SLOT#-2-LC_MTS_ERROR: An MTS error has occurred in
This is a software error in message communication between two applications.
Explanation
Contact the Cisco Technical Assistance Center (TAC) through the Cisco
Recommended Action
Support web site http://www.cisco.com/tac.
LC_RDL-3-SYSLOG_ALLOC_FAIL: : [chars]
RDL malloc failed : [chars].
Explanation
No action is required.
Recommended Action
LC_RDL-3-SYSLOG_CONTEXT_ERR: : [chars] [dec]
RDL context error: [chars] [dec].
Explanation
No action is required.
Recommended Action
LC_RDL-3-SYSLOG_ERR: : [chars]
RDL syslog errors : [chars].
Explanation
Recommended Action No action is required.
LC_PORT_MGR-SLOT# Messages
Cisco NX-OS System Messages Reference
2-365