L3Vm-2; L3Vm-3 - Cisco AP775A - Nexus Converged Network Switch 5010 Reference

L3VM Messages
S e n d d o c u m e n t c o m m e n t s t o n e x u s 7 k - f e e d b a c k - d o c @ c i s c o . c o m
Error Message
Explanation
Parameters: Invalid Argument, L3vm Function ...
Recommended Action
Error Message
Explanation
Parameters: Failed Operation, L3vm Function ...
Recommended Action
Error Message
Explanation
Parameters: Failed API, Error Code, Error Description, L3vm Function ...
Recommended Action
Error Message
Explanation
misconfiguration, or the router might not have enough memory installed.
Parameters: Allcated Data, L3vm Function ...
Recommended Action
all VDCs on the system.
Error Message
%s in %s()
Explanation
Parameters: Pending Key, L3vm Function ...
Recommended Action
Error Message
Explanation
Parameters: Failed API, Error Code, Error Description, L3vm Function ...
Recommended Action
Cisco NX-OS System Messages Reference
2-358
L3VM-3-INVALID_ARG Format: invalid arguments - %s - in %s()
Invalid arguments passed in an l3vm function
No action is required.
L3VM-3-LIBAPI_FAILED Format: %s - failed in %s()
L3vm called an API that has failed
No action is required.
L3VM-3-MTS Format: Error returned from %s, errno: 0x%08x (%s) in %s()
L3VM called an MTS API which returned an error.
No action is required.
L3VM-3-NOMEM Format: Failed to allocate %s in %s()
L3VM has run out of memory. This can be caused by a general network or router
Use 'reload' command to reload the system. Be aware that this problem affects
L3VM-3-PENDING_SDB_WRITE Format: SDB write operation is pending for
L3VM discovered that there is a pending sdb operation
No action is required.
L3VM-3-PSS Format: Error returned from %s, errno: 0x%08x (%s) in %s()
L3VM called a PSS API which returned an error.
No action is required.
Chapter 2 System Messages and Recovery Procedures
OL-15994-03