Restore; Cisco Mds 9000 Family Fabric Manager Configuration Guide; Importing Pm Statitics Data To Fabric Manager; Installing Fabric Manager - Cisco AP775A - Nexus Converged Network Switch 5010 Configuration Manual

Installing the Management Software
S e n d d o c u m e n t a t i o n c o m m e n t s t o m d s f e e d b a c k - d o c @ c i s c o . c o m

Restore

To restore Fabric Manager database, you must have a good backup file, and you must stop the Fabric
Manager server before restoration. Run restore and enter these commands on Linux Solaris. Assume
INSTALLDIR is the top directory of the Fabric Manager installation.

Importing PM Statitics Data to Fabric Manager

To manually import existing Performance Manager statistics data to Fabric Manager, follow these steps:
Step 1 Stop the Fabric Manager Server.
Copy the existing RRD file (from a prior installation) to $INSTALLDIR/pm/db.
Step 2
Run the $INSTALLDIR/bin/pm.bat s.
Step 3
Restart the Fabric Manager Server.
Step 4
Add the fabric to the Performance Manager collection using WebClient.
Step 5
The Performance Manager historic statistics are available on WebClient after the application has been
running for an hour..

Installing Fabric Manager

As of Cisco MDS NX-OS Release 4.1(3a), Fabric Manager is no longer packaged with a Cisco MDS
9000 Family switch. You must install Fabric Manager from the CD-ROM or from Cisco.com.
Users installing Fabric Manager must have full administrator privileges to create user accounts and start
Note
services. Users should also have access to all ports. These are the ports used by Fabric Manager Server
and the PostgreSQL database: 1098, 1099, 4444, 4445, 8009, 8083, 8090, 8092, 8093, 514, 5432.
For switches running Cisco MDS 9000 FabricWare, you must install Fabric Manager from the CD-ROM
included with your switch, or you can download Fabric Manager from Cisco.com.
To download the software from Cisco.com, go to the following website:
http://cisco.com/cgi-bin/tablebuild.pl/mds-fm
To install Fabric Manager on Solaris, follow these steps:
Set Java 1.5 to the path that is to be used for installing Fabric Manager.
Step 1
Copy the Fabric Manager jar file m9000-fm-3.2.0.136.jar from the CD-ROM to a folder on the Solaris
Step 2
workstation.
Launch the installer using the following command:
Step 3
java -Xms512m Xmx512m -jar m9000-fm-3.2.0.136

Cisco MDS 9000 Family Fabric Manager Configuration Guide

2-24
cd $INSTALLDIR/bin
./FMServer.sh stop
./pgrestore.sh 02252008.data
./FMServer.sh start
Chapter 2 Installing Cisco MDS NX-OS and Fabric Manager
OL-17256-03, Cisco MDS NX-OS Release 4.x