Cisco AP775A - Nexus Converged Network Switch 5010 Reference page 749

Nx-os system messages reference
Hide thumbs Also See for AP775A - Nexus Converged Network Switch 5010:
Table of Contents

Advertisement

Chapter 2
System Messages and Recovery Procedures
S e n d d o c u m e n t c o m m e n t s t o n e x u s 7 k - f e e d b a c k - d o c @ c i s c o . c o m
Error Message
by UUID [hex] (PID [dec]).
Explanation
mentioned UUID has requested a partial write mem. [dec] is the Process-ID of the process servicing
the request.
Recommended Action
Error Message
will now start stateless.
Explanation
Recommended Action
Error Message
started (PID [dec]).
Explanation
database. This happens during the nondisruptive fabric switch upgrade.
Recommended Action
Error Message
restored.
Explanation
nondisruptive fabric switch upgrade.
Recommended Action
Error Message
(PID [dec]).
Explanation
This happens during the nondisruptive fabric switch upgrade.
Recommended Action
Error Message
System Manager database.
Explanation
Recommended Action
OL-15994-03
SYSMGR-5-PARTIAL_CFGWRITE_STARTED: Partial configuration copy started
This message is printed only on active supervisor, and indicates that service with
No action is required.
SYSMGR-5-RECOVERY_FAILED: Stateful recovery failed, system manager
Stateful recovery failed, system manager will now restart system and start stateless.
No action is required.
SYSMGR-5-RUNTIME_DB_RESTORE_STARTED: Runtime database controller
This message indicates that the system has started the restoration of the runtime
No action is required.
SYSMGR-5-RUNTIME_DB_RESTORE_SUCCESS: Runtime database successfully
This message indicates that the runtime database has been successfully restored for the
No action is required.
SYSMGR-5-RUNTIME_DB_SAVE_STARTED: Runtime database save has started
This message indicates that the system has started the saving of the runtime database.
No action is required.
SYSMGR-5-SERVICE_DELETED: Service [chars] has been removed from the
This is a legacy message that can be igored from Cisco MDS SAN-OS release 1.3(4a).
No action is required.
Cisco NX-OS System Messages Reference
SYSMGR Messages
2-711

Advertisement

Table of Contents
loading

Table of Contents