Isis-2 - Cisco AP775A - Nexus Converged Network Switch 5010 Reference

ISIS Messages
S e n d d o c u m e n t c o m m e n t s t o n e x u s 7 k - f e e d b a c k - d o c @ c i s c o . c o m
Error Message
Explanation
Recommended Action
Error Message
mismatched
Explanation
Parameters: Interface Name, Interface Ordinal, Interface Memory, Interface Memory Ordinal Value
...
Recommended Action
Error Message
Explanation
Parameters: Level, LSP-ID ...
Recommended Action
Error Message
Explanation
Parameters: Level, LSP-ID ...
Recommended Action
Error Message
Explanation
Parameters: Level ...
Recommended Action
Error Message
Explanation
Parameters: Reason ...
Recommended Action
Error Message
Explanation
Parameters: Thread Name, Error Number ...
Recommended Action
Cisco NX-OS System Messages Reference
2-316
ISIS-2-IIB_EXT Format: %s extension msg for %s (%d) - %s
An unexpected but recoverable event has occurred.
Use the 'restart' command to restart the feature and clear this problem.
ISIS-2-IM_DEL Format: Delete msg for %s (%d) iib %p - iib iod %d
An unexpected but recoverable event has occurred.
Use the 'restart' command to restart the feature and clear this problem.
ISIS-2-LSP_FREE_DELINK Format: L%d %s is not on free list
An unexpected but recoverable event has occurred.
Use the 'restart' command to restart the feature and clear this problem.
ISIS-2-LSP_FREE_LINK Format: L%d %s is already on free list
An unexpected but recoverable event has occurred.
Use the 'restart' command to restart the feature and clear this problem.
ISIS-2-MCAST_ADD Format: Failed to add L%d multicast address
Was unable to join to the appropriate multicast group on an interface.
Use the 'restart' command to restart the feature and clear this problem.
ISIS-2-MEM_ERR Format: Insufficient memory for %s
Memory is not available for adding SNP entries
Use the 'restart' command to restart the feature and clear this problem.
ISIS-2-MQRCVD Format: %s thread - message queue receive failure <%d>
An unexpected but recoverable event has occurred.
Use the 'restart' command to restart the feature and clear this problem.
Chapter 2 System Messages and Recovery Procedures
OL-15994-03