Cisco AP775A - Nexus Converged Network Switch 5010 Reference page 457

Chapter 2 System Messages and Recovery Procedures
S e n d d o c u m e n t c o m m e n t s t o n e x u s 7 k - f e e d b a c k - d o c @ c i s c o . c o m
Error Message
Explanation
: [chars].
Recommended Action
Support web site http://www.cisco.com/tac.
Error Message
Explanation
[chars].
Recommended Action
Support web site http://www.cisco.com/tac.
Error Message
Explanation
Recommended Action
Error Message
Explanation
Recommended Action
Error Message
because [chars]
Explanation
Make sure cfs distRIBution is enabled.
Recommended Action
Error Message
Explanation
Recommended Action
Error Message
Explanation
Recommended Action
OL-15994-03
NPV-3-MERGE_ACTIVATION_FAILED: [chars]
An error has occurred while activating merged configuration. The reason for the failure
Contact the Cisco Technical Assistance Center (TAC) through the Cisco
NPV-3-MERGE_FAILED: [chars]
An error has occurred while merging the configuration. The reason for the failure :
Contact the Cisco Technical Assistance Center (TAC) through the Cisco
NPV-3-MTS_SEND_FAILED: [chars]
NPV process could not send an MTS message.
No action is required.
NPV-3-NPIV_DISABLE_FAILED: [chars]
NPIV feature could not be disabled.
No action is required.
NPV-3-NPV_CFS_IPV4_ENABLE_FAILED: CFS IPv4 distribution enable failed
NPV CFS distRIBution might not work. Try enabling it again on the command line.
No action is required.
NPV-3-PORT_BRINGUP_FAILED: [chars]
NPV process has failed to bring up the port.
No action is required.
NPV-3-PORT_REINIT_FAILED: [chars]
Port reinit request initiated by the NPV process has failed.
No action is required.
Cisco NX-OS System Messages Reference
NPV Messages
2-419