Cisco AP775A - Nexus Converged Network Switch 5010 Reference page 503

Chapter 2 System Messages and Recovery Procedures
S e n d d o c u m e n t c o m m e n t s t o n e x u s 7 k - f e e d b a c k - d o c @ c i s c o . c o m
Error Message
Explanation
Parameters: Function Name, Line ...
Recommended Action
Error Message
dropping
Explanation
Parameters: VRF ...
Recommended Action
Error Message
reason: %s\n
Explanation
Parameters: Restart Reason ...
Recommended Action
Error Message
Explanation
Parameters: Segment Size ...
Recommended Action
Error Message
Explanation
Parameters: Address ...
Recommended Action
Error Message
Explanation
Parameters: Message String Error String ...
Recommended Action
Error Message
Explanation
Parameters: Addresses, Function Name ...
Recommended Action
OL-15994-03
PIM6-3-RDLOCK_ASSERT Format: %s:%d: Assert, read-lock not acquired
Caller Failed to get PIM6 Shared Memory read lock
No action is required.
PIM6-3-RESERVE_LIMIT Format: Exceeded reserve-limit for VRF %s -
Exceeded the reserve-limit for VRF
No action is required.
PIM6-3-RESTART_REASON Format: PIM6 process has restarted, restart
PIM6 is restoring the routes it had added in previous instance.
No action is required.
PIM6-3-RLIMIT Format: Couldn't set PIM6 data segment size to %lu
PIM6 process could not set a memory resource limit, exiting.
No action is required.
PIM6-3-ROUTE_LOOKUP Format: Couldn't find PIM6 route %s
PIM6 failed to find entry in the local route-table.
No action is required.
PIM6-3-SETSOCKOPT Format: setsockopt() on %s failed: %s
PIM6 failed in UDP socket operation. Auto-RP will not work.
Dump core, and and and then restart component.
PIM6-3-SETUP_ROUTE Format: Couldn't setup PIM6 route %s in %s
PIM6 failed to install route in the local route-table.
No action is required.
Cisco NX-OS System Messages Reference
PIM6 Messages
2-465