Cisco AP775A - Nexus Converged Network Switch 5010 Reference page 290

IGMP Messages
S e n d d o c u m e n t c o m m e n t s t o n e x u s 7 k - f e e d b a c k - d o c @ c i s c o . c o m
Error Message
%d iods in %s
Explanation
Parameters: OIF list, OIF count, Function name ...
Recommended Action
Support web site http://www.cisco.com/tac.
Error Message
Explanation
Parameters: API name, Function name ...
Recommended Action
Error Message
Explanation
Parameters: MTS IPC operation, Function name, Error ID ...
Recommended Action
Error Message
leave-port in %s for group %s
Explanation
Parameters: Vlan ID, Group address ...
Recommended Action
Support web site http://www.cisco.com/tac.
Error Message
Explanation
Parameters: Structure type, Function name ...
Recommended Action
Error Message
xid 0x%x
Explanation
igored.
Recommended Action
Cisco NX-OS System Messages Reference
2-252
IGMP-3-INVALID_OIF_LIST Format: IGMP Snooping invalid OIF list %s with
IGMP-SNOOP has invalid number of iods.
Contact the Cisco Technical Assistance Center (TAC) through the Cisco
IGMP-3-LIB_API_FAILED Format: %s failed in %s
Process failed in invoking IGMP API.
No action is required.
IGMP-3-LIB_MTS_FAILED Format: %s failed in %s, errno: %s
Process failed to access the IGMP MTS-queue.
No action is required.
IGMP-3-LVPORT_CREATE Format: IGMP Snooping couldn't create an
IGMP-SNOOP called an API which returned an error.
Contact the Cisco Technical Assistance Center (TAC) through the Cisco
IGMP-3-MALLOC_FAILED Format: %s failed in %s
IGMP process is out of free memory.
Configure the network or router to decrease the number of routes.
IGMP-3-MFDM_NO_BUF Format: Cannot find MFDM buffer from route-ack for
IGMP process could not find a route buffer in its queue from the MFDM message,
No action is required.
Chapter 2 System Messages and Recovery Procedures
OL-15994-03