Cisco AP775A - Nexus Converged Network Switch 5010 Reference page 222

FC-TUNNEL Messages
S e n d d o c u m e n t c o m m e n t s t o n e x u s 7 k - f e e d b a c k - d o c @ c i s c o . c o m
Error Message
Explanation
API and 0x[hex] specifies the error.
Recommended Action
Error Message
[dec]
Explanation
number is specified in [dec].
Recommended Action
Error Message
Explanation
API and 0x[hex] specifies the error.
Recommended Action
Error Message
[hex]
Explanation
describes the API and 0x[hex] specifies the error.
Recommended Action
Error Message
[chars] failed with error [hex]
Explanation
the runtime configuration. [chars] describes the configuration which the process tried to restore and
0x[hex] is the system error code.
Recommended Action
Error Message
Explanation
Recommended Action
Cisco NX-OS System Messages Reference
2-184
FC-TUNNEL-3-IPFC_ERROR: IPFC API, [chars], failed with error [hex]
FCMPLS tunnel invoked IPFC API and received the error code. [chars] describes the
No action is required.
FC-TUNNEL-3-MTS_ERROR: MTS message transmission failed with error
FCMPLS tunnel process unsuccessfully tried to send an MTS message. MTS error
No action is required.
FC-TUNNEL-3-NS_ERROR: FCNS API, [chars], failed with error [hex]
FCMPLS tunnel invoked FCNS API and received the error code. [chars] describes the
No action is required.
FC-TUNNEL-3-PM_ERROR: Port Manager API, [chars], failed with error
FCMPLS tunnel invoked Port Manager API and received the error code. [chars]
No action is required.
FC-TUNNEL-3-PSS_CFG_RESTORE_ERROR: Configuration restoration for
FCMPLS tunnel read the saved configuration and has detected an error while rebuilding
No action is required.
FC-TUNNEL-3-PSS_ERROR: PSS operation [chars] returned error: [hex]
[chars] specifies the context where the failure occurred and 0x[hex] specifies the error.
No action is required.
Chapter 2 System Messages and Recovery Procedures
OL-15994-03