Cisco AP775A - Nexus Converged Network Switch 5010 Reference page 102

BGP Messages
S e n d d o c u m e n t c o m m e n t s t o n e x u s 7 k - f e e d b a c k - d o c @ c i s c o . c o m
BGP-5
Error Message
Error Message
Error Message
BGP-6
Error Message
path segments in it from peer %s
Error Message
than configured maxas-limit %d
Error Message
deconfiguration
Cisco NX-OS System Messages Reference
2-64
BGP-5-ADJCHANGE Format: neighbor %s %s %s
A BGP session has just been established. Or a session has just been shutdown.
Explanation
Parameters: Neighbor address, Up or Down, Reason ...
No action is required.
Recommended Action
BGP-5-BADSIG Format: Should not have received signal %d
An unexpected but recoverable event has occurred.
Explanation
No action is required.
Recommended Action
BGP-5-MEMALERT Format: BGP memory status changed from %s to %s
The system has detected an error.
Explanation
Parameters: Current memory status ...
No action is required.
Recommended Action
BGP-6-AS4PATH_CONFED Format: Received AS4_PATH with CONFED related
The peer has sent an AS4_PATH with configured path segments that will be discarded
Explanation
discarded.
No action is required.
Recommended Action
BGP-6-BADASPATH Format: Long AS path %s received from peer %s: more
Session can be brought because the maximum-peer limit.
Explanation
No action is required.
Recommended Action
BGP-6-EXIT_DECONFIG Format: BGP process exiting due to
The indicated BGP process has been deconfigured.
Explanation
Recommended Action No action is required.
Chapter 2 System Messages and Recovery Procedures
OL-15994-03