Cisco AP775A - Nexus Converged Network Switch 5010 Reference page 90

BGP Messages
S e n d d o c u m e n t c o m m e n t s t o n e x u s 7 k - f e e d b a c k - d o c @ c i s c o . c o m
Error Message
%s/%d
Explanation
Recommended Action
Support web site http://www.cisco.com/tac.
Error Message
Explanation
Parameters: Function ...
Recommended Action
Support web site http://www.cisco.com/tac.
Error Message
Explanation
Parameters: Error Type, Error ...
Recommended Action
Support web site http://www.cisco.com/tac.
Error Message
Explanation
Recommended Action
after any change.
Error Message
Explanation
Recommended Action
Support web site http://www.cisco.com/tac.
Error Message
Explanation
Recommended Action
Support web site http://www.cisco.com/tac.
Cisco NX-OS System Messages Reference
2-52
BGP-3-FINDAGGR Format: [%s] Did not find aggregate path for entry
BGP was unable to find an internal datastructure for originating a configured aggregate.
Contact the Cisco Technical Assistance Center (TAC) through the Cisco
BGP-3-ILLARGS Format: %s called with illegal arguments
An internal software error occurred.
Contact the Cisco Technical Assistance Center (TAC) through the Cisco
BGP-3-INTERNAL Format: Internal error %d: %s
An internal software error occurred.
Contact the Cisco Technical Assistance Center (TAC) through the Cisco
BGP-3-INVHDR Format: Peer %s sent unexpected header pattern
The marker pattern in the message header was invalid.
Check that the peer router is configured correctly. Clear the peer if necessary
BGP-3-IPTOS Format: Unable to set IP TOS bits for %s, fd %d
An unexpected but recoverable event has occurred.
Contact the Cisco Technical Assistance Center (TAC) through the Cisco
BGP-3-LIST Format: %s
An internal software error occurred.
Contact the Cisco Technical Assistance Center (TAC) through the Cisco
Chapter 2 System Messages and Recovery Procedures
OL-15994-03