Radius Messages - Cisco AP775A - Nexus Converged Network Switch 5010 Reference

RADIUS Messages

S e n d d o c u m e n t c o m m e n t s t o n e x u s 7 k - f e e d b a c k - d o c @ c i s c o . c o m
Error Message
Error Message
Error Message
Error Message
Error Message
RADIUS Messages
This section contains the RADIUS messages.
RADIUS-2
Error Message
Cisco NX-OS System Messages Reference
2-554
QOS-6-PSS_CREATED: [chars] PSS Created
One of the persistent information database of the QoS Manager has been recreated.
Explanation
No action is required.
Recommended Action
QOS-6-PSS_DESTROYED: [chars] PSS Destroyed
Explanation One of the persistent information databases of the QoS Manager has been intentionally
destroyed and would be recreated.
Recommended Action No action is required.
QOS-6-SERVICE_UP: Initialized [chars]
Explanation The QoS Manager is up and ready to accept client requests The service was initialized
in [char] mode.
Recommended Action No action is required.
QOS-6-SWITCHOVER: Switching Over to other Supervisor.
The QoS Manager has successfully switched over to the standby supervisor module.
Explanation
No action is required.
Recommended Action
QOS-6-UNKNOWNMTS: QoS Manager received an unexpected message
QoS Manager received an unexpected message.
Explanation
No action is required.
Recommended Action
RADIUS-2-RADIUS_NO_AUTHEN_INFO: ASCII authentication not supported
Explanation ASCII authentication not supported.
Contact the Cisco Technical Assistance Center (TAC) through the Cisco
Recommended Action
Support web site http://www.cisco.com/tac.
Chapter 2 System Messages and Recovery Procedures
OL-15994-03