Svc Messages - Cisco AP775A - Nexus Converged Network Switch 5010 Reference

Chapter 2 System Messages and Recovery Procedures
S e n d d o c u m e n t c o m m e n t s t o n e x u s 7 k - f e e d b a c k - d o c @ c i s c o . c o m

SVC Messages

This section contains the SVC messages.
SVC-0
Error Message
SVC-1
Error Message
SVC-2
Error Message
Error Message
Reason: [hex]
Error Message
user for interface [chars]
OL-15994-03
SVC-0-NODE_EMERG_MSG: [chars]
Syslog message from a SVC interface node.
Explanation
No action is required.
Recommended Action
SVC-1-NODE_ALERT_MSG: [chars]
Syslog message from a SVC interface node.
Explanation
Recommended Action No action is required.
SVC-2-NODE_CRIT_MSG: [chars]
Syslog message from a SVC interface node.
Explanation
No action is required.
Recommended Action
SVC-2-SVC_SYSLOG_INIT_FAILED: Initialization failed for SVC: [chars],
Initialization failed for SVC.
Explanation
No action is required.
Recommended Action
SVC-2-SVC_SYSLOG_NO_PORT_CHAN: Too many PortChannels allocated by
Explanation SVC interface needs port channels to operate. Too many port channels have been
allocated by the user for the interface to operate correctly.
Delete unneeded user configured port channels and shutdown the SVC
Recommended Action
interface. Once complete, please bring the SVC interface back up.
Cisco NX-OS System Messages Reference
SVC Messages
2-629