Cisco AP775A - Nexus Converged Network Switch 5010 Reference page 116

CFS Messages
S e n d d o c u m e n t c o m m e n t s t o n e x u s 7 k - f e e d b a c k - d o c @ c i s c o . c o m
CFS-2
Error Message
reason [chars]
Error Message
Error Message
Error Message
Error Message
Error Message
Cisco NX-OS System Messages Reference
2-78
CFS-2-CFS_REJECT: CFS reject: [chars]: Switch WWN [chars], ip [chars],
This message indicates that the CFS process was rejected: [chars] Switch WWN
Explanation
[chars], ip [chars], reason [chars].
No action is required.
Recommended Action
CFS-2-EXITING: Exit reason: [chars]
The CFS service process has exited due to [char]. The process has probably been
Explanation
restarted automatically.
No action is required.
Recommended Action
CFS-2-GENERAL_ERROR: [chars]
The CFS service has encountered a critical error. The description of the error is [str.].
Explanation
No action is required.
Recommended Action
CFS-2-INITFAIL: CFS Service Init failed: [chars]
CFS Service initialization has failed. [chars] explains the reason for the failure.
Explanation
Recommended Action No action is required.
CFS-2-LOCK_FAILED: lock failed for sap [dec] due to internal error.
Lock failed due to Unrestricted uncoordinated count is out of synchronizationfor sap
Explanation
[dec].
Recommended Action To recover from this state run command 'cfs internal decrement-unrestricted
<app-sap>'.
CFS-2-MALLOC_ERROR: Size [dec] bytes
The CFS service could not allocate enough memory.
Explanation
Contact the Cisco Technical Assistance Center (TAC) through the Cisco
Recommended Action
Support web site http://www.cisco.com/tac.
Chapter 2 System Messages and Recovery Procedures
OL-15994-03