Cisco AP775A - Nexus Converged Network Switch 5010 Reference page 272

GLBP Messages
S e n d d o c u m e n t c o m m e n t s t o n e x u s 7 k - f e e d b a c k - d o c @ c i s c o . c o m
GLBP-2
Error Message
GLBP-3
Error Message
table
Error Message
table
Error Message
Error Message
multicast address group
Error Message
multicast address group
Cisco NX-OS System Messages Reference
2-234
GLBP-2-GLBP_URIB_INIT_ERROR: [chars]
Unicast routing initialization has failed and the GLBP process terminated.
Explanation
Check syslog messages for URIB failures and fix the problem.
Recommended Action
GLBP-3-GLBP_ARP_ADD_FAILED: failed to add [chars]/[chars] in arp
The system was unable to add the GLBP vIP into the arp table.
Explanation
Check syslog messages for ARP failures and fix the problem.
Recommended Action
GLBP-3-GLBP_ARP_DEL_FAILED: failed to delete [chars]/[chars] in arp
The system was unable to delete the GLBP vIP from the arp table.
Explanation
Recommended Action Check syslog messages for ARP failures and fix the problem.
GLBP-3-GLBP_FEATURE_MANAGER_ERROR: [chars]: [chars]
There was a problem in GLBP interaction with feature manager.
Explanation
Check the reason for error using feature manager and fix the problem.
Recommended Action
GLBP-3-GLBP_IP_JOIN_GROUP_FAILED: [chars]: failed to join glbp
The system was unable to perform a join to start receiving GLBP protocol packets.
Explanation
Check syslog messages for IP failures and fix the problem.
Recommended Action
GLBP-3-GLBP_IP_LEAVE_GROUP_FAILED: [chars]: failed to leave glbp
The system was unable to perform a leave to stop receiving GLBP protocol packets.
Explanation
Check syslog messages for IP failures and fix the problem.
Recommended Action
Chapter 2 System Messages and Recovery Procedures
OL-15994-03