Diag_Port_Lb-2 - Cisco AP775A - Nexus Converged Network Switch 5010 Reference

Chapter 2 System Messages and Recovery Procedures
S e n d d o c u m e n t c o m m e n t s t o n e x u s 7 k - f e e d b a c k - d o c @ c i s c o . c o m
Error Message
Error:[chars]
Error Message
Test:RewriteEngine Loopback failed [dec] consecutive times. Faulty module:[chars]
affected ports:[chars] Error:[chars]
Error Message
DIAG_PORT_LB-3
Error Message
Error:[chars].
Error Message
Error:[chars]
Error Message
OL-15994-03
DIAG_PORT_LB-2-PROC_INIT_FAILURE: [chars]([dec]) [chars]
Explanation Port Loopback test process failed in process initialization.
No action is required.
Recommended Action
DIAG_PORT_LB-2-REWRITE_ENGINE_LOOPBACK_TEST_FAIL: Module:[dec]
The Rewrite Engine Loopback test has failed on the module consecutively.
Explanation
No action is required.
Recommended Action
DIAG_PORT_LB-2-VLAN_ERROR: [chars]([dec]) [chars] Error:[chars]
Port Loopback test process failed to get Diagnostic VLAN information.
Explanation
No action is required.
Recommended Action
DIAG_PORT_LB-3-DIAG_FWD_PATH_SETUP_FAILURE: [chars]. Module:[dec]
Forwarding path setup for port loopback tests failed.
Explanation
No action is required.
Recommended Action
DIAG_PORT_LB-3-DIAG_PKT_SEND_FAILURE: [chars]([dec]) [chars].
Port Loopback test process failed to send loopback packets.
Explanation
No action is required.
Recommended Action
DIAG_PORT_LB-3-FSM_LIB_ERROR: [chars]([dec]) [chars]. Error:[chars]
Explanation Port Loopback test process failed in MTS API.
No action is required.
Recommended Action
DIAG_PORT_LB Messages
Cisco NX-OS System Messages Reference
2-115