L2Fmc-Slot# Messages; L2Fmc-Slot#-0; L2Fm-1; L2Fm-2 - Cisco AP775A - Nexus Converged Network Switch 5010 Reference

Chapter 2 System Messages and Recovery Procedures
S e n d d o c u m e n t c o m m e n t s t o n e x u s 7 k - f e e d b a c k - d o c @ c i s c o . c o m
L2FM-6
Error Message
opcode [dec]

L2FMC-SLOT# Messages

This section contains the L2FMC-SLOT# messages.

L2FMC-SLOT#-0

Error Message
Error Message
failed!
Error Message
initialization failed!
Error Message
failed!
OL-15994-03
L2FM-6-L2FM_MTS_SEND_FAILED: Failed to send MTS message errno [hex]
Contact the Cisco Technical Assistance Center (TAC) through the Cisco Support web
Explanation
site http://www.cisco.com/tac.
Contact the Cisco Technical Assistance Center (TAC) through the Cisco
Recommended Action
Support web site http://www.cisco.com/tac.
L2FMC-SLOT#-0-CLI_INIT_FAILED: CLI library initialization failed!
L2FMC failed to initialize CLI infrastructure\sbackendlibrary.Thisisafatalerror.'
Explanation
No action is required.
Recommended Action
L2FMC-SLOT#-0-L2FMC_CLI_INIT_FAILED: CLI library initialization
L2FMC failed to initialize CLI infrastructure\sbackendlibrary.Thisisafatalerror.'
Explanation
Recommended Action No action is required.
L2FMC-SLOT#-0-L2FMC_TIMER_INIT_FAILED: Timer subsystem
Explanation L2FMC failed to initialize timer library. This is a fatal error.
No action is required.
Recommended Action
L2FMC-SLOT#-0-TIMER_INIT_FAILED: Timer subsystem initialization
L2FMC failed to initialize timer library. This is a fatal error.
Explanation
No action is required.
Recommended Action
L2FMC-SLOT# Messages
Cisco NX-OS System Messages Reference
2-351