Acltcam Messages - Cisco AP775A - Nexus Converged Network Switch 5010 Reference

Chapter 2 System Messages and Recovery Procedures
S e n d d o c u m e n t c o m m e n t s t o n e x u s 7 k - f e e d b a c k - d o c @ c i s c o . c o m

ACLTCAM Messages

This section contains the ACLTCAM messages.
ACLTCAM-2
Error Message
VSAN: [dec], SID: [chars] DID: [chars], error: [chars].
Error Message
Usage ([dec]/[dec]) exceeded [dec]% fwd-eng: [dec], [chars]
Error Message
Error: [hex].
Error Message
Error: [hex].
Error Message
inconsistent.
OL-15994-03
ACLTCAM-2-ACL_TCAM_ADJ_EXHAUSTED: ACLTCAM failed to program route for
Explanation The ACLTCAM process has experienced a failure while programming a route for
VSAN [dec] SID [chars] DID [chars] due to resource exhaustion. [chars] is the error code.
No action is required.
Recommended Action
ACLTCAM-2-ACL_TCAM_ALMOST_FULL: TCAM close to FULL. [chars] TCAM
Explanation [chars] TCAM usage [dec]/[dec] exceeded [dec] percent on fwd-engine [dec], [chars].
No action is required.
Recommended Action
ACLTCAM-2-ACL_TCAM_CONFIG_READ_FROM_DRIVER_FAILED: [chars] [dec],
The system is unable to read the configuration from the forwarding engine ASIC driver.
Explanation
[chars] [dec], Error: 0x[hex].
No action is required.
Recommended Action
ACLTCAM-2-ACL_TCAM_CONFIG_WRITE_TO_DRIVER_FAILED: [chars] [dec],
The system is unable to write the configuration to the forwarding engine ASIC driver.
Explanation
[chars] [dec], Error: 0x[hex].
No action is required.
Recommended Action
ACLTCAM-2-ACL_TCAM_INCONSISTENT_DATABASE: Database found
Database found inconsistent.
Explanation
Recommended Action No action is required.
Cisco NX-OS System Messages Reference
ACLTCAM Messages
2-15