Cisco AP775A - Nexus Converged Network Switch 5010 Reference page 155

Chapter 2 System Messages and Recovery Procedures
S e n d d o c u m e n t c o m m e n t s t o n e x u s 7 k - f e e d b a c k - d o c @ c i s c o . c o m
Error Message
Explanation
Recommended Action
Error Message
[chars]:[hex] to [chars]. Error:[chars]
Explanation
Recommended Action
Error Message
request to configure port ifindex:[dec] for port loopback test
Explanation
Recommended Action
Error Message
Error:[chars]
Explanation
Recommended Action
Error Message
Test:PortLoopback failed [dec] consecutive times. Faulty module:[dec] affected
ports:[chars] Error:[chars]
Explanation
Recommended Action
Error Message
Error:[chars]
Explanation
Recommended Action
Error Message
Explanation
Recommended Action
OL-15994-03
DIAG_PORT_LB-3-PDB_LIB_API_ERROR: Failed to [chars]. Error:[dec].
The port loopback test was not able to get chassis information.
No action is required.
DIAG_PORT_LB-3-PIXM_LIB_ERROR: [chars]([dec]) Failed to convert
Port Loopback test process failed to convert port ifindex <-> port index.
No action is required.
DIAG_PORT_LB-3-PORT_CFG_REQ_SEND: [chars]([dec]) Failed to send
Failed to configure/restore the port to do/cleanup port loopback testing.
No action is required.
DIAG_PORT_LB-3-PORT_CLIENT_LIB_ERROR: [chars]([dec]) [chars].
Port Loopback test process failed in Port Client API.
No action is required.
DIAG_PORT_LB-3-PORTLOOPBACK_TEST_FAIL: Module:[dec]
The PortLoopback test has failed on the module consecutively.
No action is required.
DIAG_PORT_LB-3-PROC_INIT_FAILURE: [chars]([dec]) [chars]
Port Loopback test process failed in process initialization.
No action is required.
DIAG_PORT_LB-3-RESULT_ADD_FAILURE: [chars]([dec]) [chars]:[dec]
Port Loopback test process failed to add the port test result.
No action is required.
DIAG_PORT_LB Messages
Cisco NX-OS System Messages Reference
2-117