Sdv Messages; Sdv-2; Sdv-3 - Cisco AP775A - Nexus Converged Network Switch 5010 Reference

Chapter 2 System Messages and Recovery Procedures
S e n d d o c u m e n t c o m m e n t s t o n e x u s 7 k - f e e d b a c k - d o c @ c i s c o . c o m
Error Message
Explanation
Recommended Action
Support web site http://www.cisco.com/tac.
Error Message
Explanation
Recommended Action
Error Message
SDV devices
Explanation
Recommended Action
Error Message
Explanation
Recommended Action
Error Message
request vsan [dec] vdev_id [dec] failed:[chars].
Explanation
error while processing the request.
Recommended Action
Error Message
Explanation
Recommended Action
Error Message
Explanation
Recommended Action
OL-15994-03
SDV-3-ASSERTION_FAILED: [chars]:[dec]
The SDM process has hit an assert condition at file [chars] line number [dec].
Contact the Cisco Technical Assistance Center (TAC) through the Cisco
SDV-3-AUTO_FAILOVER_ERROR: [chars]
SDV Virtual-device failed to auto-failover due to [chars].
No action is required.
SDV-3-BCAST_NOT_SUPPORTED: Broadcast attribute will be ignored for
Broadcast attribute will be igored for SDV devices.
No action is required.
SDV-3-ENQUEUE_EVENT_FAIL: Unable to enqueue event into state machine
The system is unable to enqueue event into state machine.
No action is required.
SDV-3-FCID_REWRITE_REQUEST_TO_ACL_FAILED: fcid rewrite [chars]
This happens when either after SDV retried the request a few times or ACL experienced
No action is required.
SDV-3-INIT_FAIL: [chars]
The SDM process init has failed due to [chars].
No action is required.
SDV-3-INTERNAL_ERR: [chars]
The SDM process encountered an internal error due to [chars].
No action is required.
Cisco NX-OS System Messages Reference

SDV Messages

2-591