Rip-3 - Cisco AP775A - Nexus Converged Network Switch 5010 Reference

Chapter 2 System Messages and Recovery Procedures
S e n d d o c u m e n t c o m m e n t s t o n e x u s 7 k - f e e d b a c k - d o c @ c i s c o . c o m
Error Message
Explanation
Parameters: Thread Name, Failure Reason ...
Recommended Action
Support web site http://www.cisco.com/tac.
Error Message
Explanation
Parameters: Error Number ...
Recommended Action
Error Message
Explanation
Parameters: Error Number ...
Recommended Action
Error Message
Explanation
Parameters: Error ...
Recommended Action
Support web site http://www.cisco.com/tac.
Error Message
Explanation
Parameters: Stop Reason ...
Recommended Action
Error Message
Explanation
Parameters: Failure Reason ...
Recommended Action
Support web site http://www.cisco.com/tac.
OL-15994-03
RIP-3-MQ_RCVD Format: %s thread - message queue receive failure (%d)
An error has occurred while trying to receive a message from another process
Contact the Cisco Technical Assistance Center (TAC) through the Cisco
RIP-3-MTS_DROP Format: Error returned from mts_drop(), errno: %s
RIP called an MTS API which returned an error.
No action is required.
RIP-3-MTS_RECV Format: Error returned from mts_recv(), errno: %s
RIP called an MTS API which returned an error.
No action is required.
RIP-3-POLICY_ERROR Format: %s
An error has occurred when processing policies
Contact the Cisco Technical Assistance Center (TAC) through the Cisco
RIP-3-PROCESS_STOP Format: Process shutting down: %s
RIP called a sysmgr API which returned an error.
No action is required.
RIP-3-SEND_FAILURE Format: Failed to send message. %s
The RAn IP process has failed to send a message to a neighbor
Contact the Cisco Technical Assistance Center (TAC) through the Cisco
Cisco NX-OS System Messages Reference
RIP Messages
2-569