Nfm-2 - Cisco AP775A - Nexus Converged Network Switch 5010 Reference

NFM Messages
S e n d d o c u m e n t c o m m e n t s t o n e x u s 7 k - f e e d b a c k - d o c @ c i s c o . c o m
Error Message
Error Message
Error Message
Interface: [chars]
NFM-3
Error Message
Error Message
Feature Manager msg - error [chars]
Error Message
Error Message
Cisco NX-OS System Messages Reference
2-410
NFM-2-MALLOC_ERROR: Function [chars]: Size [dec] bytes
The NFM service could not allocate enough memory.
Explanation
Contact the Cisco Technical Assistance Center (TAC) through the Cisco
Recommended Action
Support web site http://www.cisco.com/tac.
NFM-2-PSS_ERROR: [chars]: PSS ret. val=[dec]
The NFM service has detected an error while operating on a persistent storage database.
Explanation
Recommended Action No action is required.
NFM-2-VERIFY_FAIL: Verify failed - Client [hex], Reason: [chars],
Explanation The DDB Verify failed.
No action is required.
Recommended Action
NFM-3-DDB_ERROR: DDB error: [chars]
The DDB has generated an error.
Explanation
No action is required.
Recommended Action
NFM-3-FEATURE_MANAGER_ERROR: [chars]: An error occurred processing a
An error has occurred while processing a message from FEATURE Manager.
Explanation
No action is required.
Recommended Action
NFM-3-HANDLE_IN_USE: [chars]: name: [chars]
The NFM service encountered a handle that was in use while reading a persistent
Explanation
storage database.
No action is required.
Recommended Action
NFM-3-INVALID_HANDLE: [chars]: handle =[hex]
The NFM service encountered an invalid handle in a persistent storage database.
Explanation
No action is required.
Recommended Action
Chapter 2 System Messages and Recovery Procedures
OL-15994-03