Cisco AP775A - Nexus Converged Network Switch 5010 Reference page 372

IVR Messages
S e n d d o c u m e n t c o m m e n t s t o n e x u s 7 k - f e e d b a c k - d o c @ c i s c o . c o m
Error Message
could not be exported to VSANs [chars] because its native switch is not present
in the current active fabric binding database of those VSANs.
Explanation
port WWN [chars] is not present in the current active fabric binding database of those VSANs. This
is a requirement for FICON compliance.
Recommended Action
Error Message
(FCID:[chars], native VSAN [dec] native AFID [dec]) may not be exported to other
VSANs (for Inter-VSAN zoning) because it has come online in VSAN [dec] AFID [dec]
Explanation
AFID/VSAN.
Recommended Action
Error Message
(FCID:[chars], native VSAN [dec]) may not be exported to other VSANs (for
Inter-VSAN zoning) because domain [hex] exists in VSAN [dec]
Explanation
device does not satisfy unique domain criteria.
Recommended Action
Error Message
Explanation
0x[hex] specifies the error.
Recommended Action
Error Message
FCID [chars] may not be able to participate in Inter-VSAN zone since domain [dec]
is disallowed in the interop mode for VSAN [dec]
Explanation
domain is out of the range allowed for this interop mode. See the Cisco MDS 9000 Family
Configuration Guide for details on the domain range limitations.
Recommended Action
to so that it is within the allowed domain list for the interop mode. The domain identifier can be
statically assigned using fcdomain interface. You can also configure a range of domains allowed in
a VSAN using the fcdomain's 'allowed-domains' interface.
Cisco NX-OS System Messages Reference
2-334
IVR-3-DEVICE_NOT_PREENT_IN_FB_DB_FICON: Device with port WWN [chars]
This happens if FICON is enabled on VSANs [chars] and native switch of device with
No action is required.
IVR-3-DEVICE_ON_WRONG_NATIVE_AFID_VSAN: Device with port WWN [chars]
Device has come online on a AFID/VSAN different from the configured native
No action is required.
IVR-3-DEVICE_ON_WRONG_NATIVE_VSAN: Device with port WWN [chars]
Device has come online on a VSAN different from the configured native VSAN or the
No action is required.
IVR-3-DM_ERROR: Domain Manager API, [chars], failed with error [hex]
IVR invoked DM API and received the error code. [chars] describes the API and
No action is required.
IVR-3-DOMAIN_DISALLOWED_IN_INTEROP: Device with port WWN [chars] and
VSAN interop modes place restrictions on what domain ranges are allowed. This
Change the domain of the switch to which this IVR zone member is connected
Chapter 2 System Messages and Recovery Procedures
OL-15994-03