Eth_Port_Channel-5 - Cisco AP775A - Nexus Converged Network Switch 5010 Reference

ETH_PORT_CHANNEL Messages
S e n d d o c u m e n t c o m m e n t s t o n e x u s 7 k - f e e d b a c k - d o c @ c i s c o . c o m

ETH_PORT_CHANNEL-5

Error Message
Error Message
Error Message
Error Message
changed from [chars] to [chars]
Error Message
down (Suspended due to incompatible mode
Error Message
down (Suspended due to incompatible speed
Cisco NX-OS System Messages Reference
2-162
ETH_PORT_CHANNEL-5-AUTO_CREATE_FAILURE: [chars] [chars]
Auto create process on the port failed.
Explanation
No action is required.
Recommended Action
ETH_PORT_CHANNEL-5-CREATED: [chars] created
A port channel is created.
Explanation
Recommended Action No action is required.
ETH_PORT_CHANNEL-5-DELETED: [chars] deleted
A port channel is deleted.
Explanation
Recommended Action No action is required.
ETH_PORT_CHANNEL-5-FOP_CHANGED: [chars]: first operational port
Explanation The first operational port in a port channel is changed.
No action is required.
Recommended Action
ETH_PORT_CHANNEL-5-IF_DOWN_SUSPENDED_BY_MODE: Interface [chars] is
Compatibility check failed when adding ports to port channel.
Explanation
Make sure the compatibility parameters are consistent between the ports and
Recommended Action
the port channel.
ETH_PORT_CHANNEL-5-IF_DOWN_SUSPENDED_BY_SPEED: Interface [chars] is
Operational compatibility check failed on the port in a port channel.
Explanation
Make sure the compatibility parameters are consistent between the ports and
Recommended Action
the port channel.
Chapter 2 System Messages and Recovery Procedures
OL-15994-03