U6Rib-3 - Cisco AP775A - Nexus Converged Network Switch 5010 Reference

Chapter 2 System Messages and Recovery Procedures
S e n d d o c u m e n t c o m m e n t s t o n e x u s 7 k - f e e d b a c k - d o c @ c i s c o . c o m
Error Message
Explanation
Parameters: Owner, Prefix, Length ...
Recommended Action
Error Message
Explanation
Parameters: Owner, Prefix, Length, Next-hop ...
Recommended Action
Error Message
Explanation
Recommended Action
Error Message
Explanation
'show routing ipv6 unicast internal event-history errors'
Parameters: Owner, Routes, RNHs ...
Recommended Action
Error Message
instance info for client \%s\, VRF %s
Explanation
further errors to indicate the failure in more detail. The shown VRF should be reconfigured in the
client. i.e. in router sub-mode configuration, 'no vrf <vrf-name>'
Parameters: Client, VRF ...
Recommended Action
Error Message
Explanation
because of this problem.
Recommended Action
OL-15994-03
U6RIB-3-INCONSISTENT_RNH Format: %s: %s/%d
The system has detected an error.
No action is required.
U6RIB-3-INCONSISTENT_ROUTE Format: %s: %s/%d via %s
The system has detected an error.
No action is required.
U6RIB-3-INCONSISTENT_STRUCTURE Format: %s
Unexpected remaining state during RIB cleanup.
No action is required.
U6RIB-3-INCONSISTENT_SUMMARY Format: %s: routes %d, rnh's %d
Unexpected remaining state for client during RIB cleanup, see following for state:
No action is required.
U6RIB-3-INSTANCE_CREATE_ERROR Format: Failed to create routing
U6RIB could not create its data structures for a client in the shown VRF. There may be
Requires operator to intervene.
U6RIB-3-KSINK_LIB_ERROR Format: %s %s
A error was encountered during ksink operations. The system may run into more errors
No action is required.
Cisco NX-OS System Messages Reference
U6RIB Messages
2-751