Qos-2 - Cisco AP775A - Nexus Converged Network Switch 5010 Reference

QOS Messages
S e n d d o c u m e n t c o m m e n t s t o n e x u s 7 k - f e e d b a c k - d o c @ c i s c o . c o m
Error Message
Error Message
Error Message
QOS-3
Error Message
Error Message
Error Message
[chars] (ACL return code=[hex])
Cisco NX-OS System Messages Reference
2-550
QOS-2-MALLOC_ERROR: Size [dec] bytes
The QoS Manager could not allocate enough memory.
Explanation
Contact the Cisco Technical Assistance Center (TAC) through the Cisco
Recommended Action
Support web site http://www.cisco.com/tac.
QOS-2-PSS_ERROR: [chars]: PSS returned value=[dec]
The QoS Manager has detected an error while operating on a persistent storage
Explanation
database.
Recommended Action No action is required.
QOS-2-STDOUT_ROTATE_FAILURE: Failed to rotate stdout file: [chars]
The QoS Manager has failed to rotate its current stdout file with filename [str.]. The file
Explanation
size could grow beyond its maximum limit.
No action is required.
Recommended Action
QOS-3-ALLOCFAIL: Heap Memory allocation failed: [chars]
QoS Manager is out of dynamic memory. [chars] specifies the context where the failure
Explanation
occurred.
No action is required.
Recommended Action
QOS-3-DBERROR: [chars]
QoS Manager encountered a database error. [chars] specifies the context where the
Explanation
failure occurred.
No action is required.
Recommended Action
QOS-3-E_PORT_ACL_FAILURE: Failed to [chars] QOS ACL for interface
The QoS Manager has failed to program or erase QoS related ACL when an E-Port
Explanation
came up or went down for the interface [str.]. The error code returned by ACL module is [int.].
No action is required.
Recommended Action
Chapter 2 System Messages and Recovery Procedures
OL-15994-03