Cisco AP775A - Nexus Converged Network Switch 5010 Reference page 437

Chapter 2 System Messages and Recovery Procedures
S e n d d o c u m e n t c o m m e n t s t o n e x u s 7 k - f e e d b a c k - d o c @ c i s c o . c o m
Error Message
Explanation
Parameters: Source ...
Recommended Action
Error Message
Explanation
Parameters: PIB Name ...
Recommended Action
Error Message
Explanation
Parameters: Message Return Code Error String ...
Recommended Action
Error Message
Explanation
for the cause.
Parameters: Failed API, Error Code, Error Description, MRIB Function ...
Recommended Action
Error Message
Explanation
Parameters: PT Operation, Function Name ...
Recommended Action
Error Message
Explanation
Recommended Action
Error Message
Explanation
Parameters: Function Name, Line ...
Recommended Action
OL-15994-03
MRIB-3-NO_SOURCE Format: Unable to create source entry for %s
MRIB process unable to create the route entry in its route-table.
No action is required.
MRIB-3-NO_TIMER Format: Could not create stale timer for \%s\
MRIB process cannot stale the routes for this procotol.
Dump core, then reload the stack.
MRIB-3-OPCODE_REGISTER Format: %s opcode: 0x%x ErrorString: %s
Opcdoe registration failed
No action is required.
MRIB-3-PSS Format: Error returned from %s, errno: 0x%08x (%s) in %s()
MRIB called a PSS API which returned an error. The error reported should be examined
ERRMSG.
MRIB-3-PT_FAILED Format: %s failed in %s
The MRIB process has failed to update route-table for this event.
Dump core, then reload the stack.
MRIB-3-PTHREAD_FAILED Format: pthread_create() failed for mrib_main()
The MRIB process has failed to create a task thread.
Dump core, then reload the stack.
MRIB-3-RDLOCK_ASSERT Format: %s:%d: Assert, read-lock not acquired
Caller Failed to get MRIB Shared Memory read lock
No action is required.
Cisco NX-OS System Messages Reference
MRIB Messages
2-399