Sysmgr-5 - Cisco AP775A - Nexus Converged Network Switch 5010 Reference

Chapter 2 System Messages and Recovery Procedures
S e n d d o c u m e n t c o m m e n t s t o n e x u s 7 k - f e e d b a c k - d o c @ c i s c o . c o m
Error Message
Explanation
'copy running-config startup-config' requested by the user. On the standby supervisor, this message
indicates that the system is synchronizing the startup-config from the active supervisor. [dec] is the
Process-ID of the process servicing the request.
Recommended Action
Error Message
(PID [dec]).
Explanation
This happens either on system boot or during the course of an upgrade.
Recommended Action
Error Message
configuration started (PID [dec]).
Explanation
due to an error in the conversion of the startup conversion.
Recommended Action
Support web site http://www.cisco.com/tac.
Error Message
[chars] to [chars].
Explanation
Recommended Action
Error Message
[dec] .
Explanation
Recommended Action
Error Message
switchover request.
Explanation
for logging purposes only and does not affect the functionality of the system.
Recommended Action
OL-15994-03
SYSMGR-5-CFGWRITE_STARTED: Configuration copy started (PID [dec]).
On the active supervisor, this message indicates that the system has started to service a
No action is required.
SYSMGR-5-CONVERT_STARTUP_STARTED: Configuration conversion started
This message indicates that the system has started conversion of startup configuration.
No action is required.
SYSMGR-5-DELETE_BINARY_STARTUP_STARTED: Deletion of binary startup
This message indicates that the system will be deleting the binary startup configuration,
Contact the Cisco Technical Assistance Center (TAC) through the Cisco
SYSMGR-5-FSM_STATE_TRANS: System Manager NESTED state transition from
The system has detected an error.
No action is required.
SYSMGR-5-HEARTBEAT_LOSS: Service [chars] heartbeat loss [dec] ,max
Log to indicate loss of HeartBeat from a service.
No action is required.
SYSMGR-5-IMPROPER_CLEANUP: Service [chars] exited without replying to
A conditional service exited without replying to switchover request. This message is
No action is required.
Cisco NX-OS System Messages Reference
SYSMGR Messages
2-709