Pim-6 - Cisco AP775A - Nexus Converged Network Switch 5010 Reference

PIM Messages
S e n d d o c u m e n t c o m m e n t s t o n e x u s 7 k - f e e d b a c k - d o c @ c i s c o . c o m
Error Message
negative-bit set, ignore group entry
Explanation
supports sparse-mode so the group entry will be igored.
Parameters: Group Address, Mask length, RP Address ...
Recommended Action
Error Message
for VRF %s
Explanation
Parameters: VRF ...
Recommended Action
Error Message
command
Explanation
Recommended Action
Error Message
Explanation
Recommended Action
Error Message
Explanation
Recommended Action
Error Message
VRF %s
Explanation
Parameters: VRF ...
Recommended Action
Error Message
Explanation
Parameters: MTS Opcode ...
Recommended Action
Cisco NX-OS System Messages Reference
2-456
PIM-6-NEGATIVE_PREFIX Format: Group prefix %s/%d from RP %s has
The RP is advertising a group range to be in dense-mode. This implementation only
No action is required.
PIM-6-RESERVE_LIMIT_WARNING Format: Exceeded 80% of the reserve-limit
Exceeded 80% of the reserve-limit for VRF
No action is required.
PIM-6-RESTART_SHUTDOWN Format: PIM shutting self down via restart
PIM process is shutting itself down due to the restart command.
No action is required.
PIM-6-SHUTDOWN Format: Shutting down PIM process
PIM received a shutdown request.
No action is required.
PIM-6-SHUTDOWN_SELF Format: PIM shutting self down
PIM process is shutting itself down.
No action is required.
PIM-6-STATE_LIMIT_WARNING Format: Exceeded 80% of the state-limit for
Exceeded 80% of the state-limit for VRF
No action is required.
PIM-6-UNKNOWN_OPC Format: Received unknown mts opcode %d
PIM process received unknown Interprocess message, dropped.
No action is required.
Chapter 2 System Messages and Recovery Procedures
OL-15994-03