Wwn Messages - Cisco AP775A - Nexus Converged Network Switch 5010 Reference

Chapter 2 System Messages and Recovery Procedures
S e n d d o c u m e n t c o m m e n t s t o n e x u s 7 k - f e e d b a c k - d o c @ c i s c o . c o m
WWN-1
Error Message
Error Message
WWN-2
Error Message
Error Message
Error Message
OL-15994-03
WWN-1-TYPE1_ALERT: [dec] (< [dec] %) Remain
The WWN Manager has run out of WWNs. No new dynamically allocated WWNs are
Explanation
available. However, statically assigned WWNs such as switch WWN, port WWN, etc. are still
available.
Please add additional WWNs by programming a new Secondary MAC address
Recommended Action
and its range.
WWN-1-TYPES2_5_ALERT: [dec] (< [dec] %) Remain
Explanation The WWN Manager has run out of WWNs of NAA Types 2 and 5.
Please add additional WWNs by programming a new Secondary MAC address
Recommended Action
and its range.
WWN-2-BKPLN_PROM_CANT_READ: Can not read backplane PROM
The WWN Manager has failed to read chassis information. No dynamic WWNs could
Explanation
be allocated.
Contact the Cisco Technical Assistance Center (TAC) through the Cisco
Recommended Action
Support web site http://www.cisco.com/tac.
WWN-2-EXITING: Exited due to [chars]
The WWN Manager process has exited due to [char]. The process has probably been
Explanation
restarted automatically.
No action is required.
Recommended Action
WWN-2-GENERAL_ERROR: [chars]
The WWN Manager has encountered a critical error. The description of the error is
Explanation
[str.].
No action is required.
Recommended Action
Cisco NX-OS System Messages Reference

WWN Messages

2-817