Cisco AP775A - Nexus Converged Network Switch 5010 Reference page 344

IPV6 Messages
S e n d d o c u m e n t c o m m e n t s t o n e x u s 7 k - f e e d b a c k - d o c @ c i s c o . c o m
Error Message
Explanation
Parameters: Function Name, Context Name ...
Recommended Action
Error Message
Explanation
Recommended Action
Error Message
Explanation
Recommended Action
Error Message
Explanation
Recommended Action
Error Message
Explanation
Recommended Action
Error Message
Explanation
Recommended Action
Error Message
%s
Explanation
Recommended Action
Error Message
Explanation
Recommended Action
Cisco NX-OS System Messages Reference
2-306
IPv6-3-M6RIB_ADD_ROUTE Format: M6RIB add route failed in %s for VRF %s
An IP process has failed to add route in M6RIB.
No action is required.
IPv6-3-MALLOC_FAILED Format: %s failed in %s
IPv6 process is out of free memory.
No action is required.
IPv6-3-MALLOC_FAILED_PREFIX Format: %s failed in %s for %s
IPV6 process is out of free memory.
No action is required.
IPv6-3-MBUF_FAILED Format: %s failed in %s (%d bytes)
IPV6 process is out of mbufs.
No action is required.
IPv6-3-MQ_FAILED Format: %s failed in %s, errno: %s
An IPv6 process has failed to access message-queue resource.
No action is required.
IPv6-3-MQ_FAILED_NAME Format: %s failed in %s for client %s, errno: %s
An IPv6 process has failed to access message-queue resource for the client.
No action is required.
IPv6-3-MQ_FAILED_PID Format: %s failed in %s to client pid: %d, errno:
An IPv6 process has failed to access message-queue resource for the client.
No action is required.
IPv6-3-MTS_FAILED Format: %s failed in %s, errno: %s
An IPv6 process has failed to access mts-queue resource.
No action is required.
Chapter 2 System Messages and Recovery Procedures
OL-15994-03