Xbar-5 - Cisco AP775A - Nexus Converged Network Switch 5010 Reference

Nx-os system messages reference
Hide thumbs Also See for AP775A - Nexus Converged Network Switch 5010:
Table of Contents

Advertisement

Chapter 2
System Messages and Recovery Procedures
S e n d d o c u m e n t c o m m e n t s t o n e x u s 7 k - f e e d b a c k - d o c @ c i s c o . c o m
Error Message
[dec] in group [dec] return_code [hex] ([chars]).
Explanation
Recommended Action
Error Message
Explanation
Recommended Action
Error Message
module %i
Explanation
Recommended Action
Error Message
module [dec]
Explanation
Recommended Action
internal event-history module <module id>'. Power cycling the module may recover.
Error Message
mode failed
Explanation
reboot. If you have two supervisor modules, a switchover will occur.
Recommended Action
Error Message
intialization return_code [hex] ([chars]).
Explanation
Recommended Action
Error Message
Explanation
to reboot. If you have two supervisor modules, a switchover will occur.
Recommended Action
OL-15994-03
XBAR-5-ARB_INIT_PORT_FAIL: Arbiter reported failure to register port
The supervisor has experienced an arbiter setup failure .
No action is required.
XBAR-5-ARBITER_INIT_FAILURE: Re-initializing Arbiter.
The supervisor has experienced an arbiter setup failure .
No action is required.
XBAR-5-ARBITER_INIT_FAILURE: Re-initializing Arbiter. [chars] [chars]
The supervisor has experienced an arbiter setup failure .
No action is required.
XBAR-5-MOD_CONNECTION_REATTEMPT: Re-attempting XBAR connection with
The module has experienced a setup failure on connecting the module to the fabric.
Collect more informations about XBAR component Use command 'show xbar
XBAR-5-XBAR_ENABLE_FPOE_DB_FAILURE: XBAR [chars] enabling FPOE-DB
The supervisor failed to enable FPOE-DB mode in fabric. The supervisor is going to
No action is required.
XBAR-5-XBAR_INIT_FAIL: Xbar [[dec].[dec]] reported failure durinig
The supervisor has experienced an crossbar setup failure.
No action is required.
XBAR-5-XBAR_INIT_FAILURE: XBAR [chars] initialization failed
The supervisor has experienced a fabric initialization failure. The supervisor is going
No action is required.
Cisco NX-OS System Messages Reference
XBAR Messages
2-825

Advertisement

Table of Contents
loading

Table of Contents