CYLINDER HEAD/VALVES
Apply molybdenum disulfide oil solution to the
threads and seating surface of the 9 mm bolts/wash
ers and install them.
Install the two 6 mm flange bolts.
Tighten the 9 mm bolts in a crisscross pattern in two
or three steps to the specified torque.
TORQUE: 47 N•m (4.8 kgf•m, 35 lbf,ft)
Tighten the 6 mm flange bolts securely.
Install the cam chain tensioner lifter onto the cylin
der head with a new gasket.
Install and tighten the bolts securely.
Install the following:
- camshaft (page 8-26)
- thermostat housing (page 6· 10)
- air cleaner housing (page 5-75)
- exhaust system (page 2· 15)
CAMSHAFT INSTALLATION
Apply molybdenum oil solution to the outer surface
of the each valve lifter.
Install the sh11ns
Install the shims on the retainers and valve lifters
and valve lifters
in
into
the valve lifter bores.
their original
locauons.
The each camshaft has identification mark.
• "FG": Intake camshaft
• "FG/EX": Exhaust camshaft
8-26
"FG/EX" MARK