Honda CB 600F Hornet 2007 Shop Manual page 462

INSPECTION
Check the caliper cylinders and pistons for scoring,
scratches or damage.
Measure each caliper cylinder I.D.
SERVICE LIMIT: 38.24 mm (1.506 in)
Measure each caliper piston O.D.
SERVICE LIMIT: 38.09 mm (1.500 in)
ASSEMBLY
s�
�
DUST SEAL
I
PISTON
Coat a new piston seal with clean brake fluid and
install it in the seal groove in the caliper body.
Coat a new dust seal with silicone grease and install
it in the seal groove in the caliper body.
Coat the caliper piston with clean brake fluid and
install it into the caliper cylinder with the opening
toward the pads.
�.
...... m
���
PISTON SEAL
�
� BRACKET PIN BOOT
e,�
HYDRAULIC BRAKE
BLEED VALVE
5.4 N·m (0.6 kgf•m.
4.0 lbf•ft)
g �
.,,_
DUST SEAL
I
PISTON SEAL
I
•
• PISTON
15-43